For vertical single-pass drilling, e.g. high-pressure injection.
Optimised for single pass
The drilling rig has been developed mostly for vertical drilling applications with a long drill mast. H-beam and pile drilling can be achieved in the most cost-effective way when the drill rod can be drilled "in a single go". This is what makes the drilling rig an excellent choice for high-pressure injection procedures (HPI).
Stiffness of the kinematics
The backstay cylinders of the drilling rig ensure the upright and lateral tilt of the mast when the stiffness is as great as possible at the same time. The drilling axis can be set easily with the parallelogram boom kinematics, in relation to the carrier - another great advantage for HPI applications.
High stability
The stable operation is achieved by using an undercarriage which can be projected across its total width from 3000 mm to 4000 mm. No additional supports are necessary. The 360° rotatable upper carriage also allows for drilling locations next to the crawler tracks.
Strong drill heads
The high power output makes it possible to operate high-torque drill heads, for example, to create bores with a continuous flight auger for in-situ concrete piles (SOB / CFA) or overburden drilling with a hydraulic drifter. High drill mast retraction forces are possible thanks to the robust design.
A rig in its own league
The drilling rig, weighing between 33 and 35 tonnes, depending on equipment and drill mast, offers an extremely economical balance between drill mast length and service weight. Because of this, but also because of the simple kinematic structure, it sets its own class of specialized drilling rigs.
High-performance and sensitive hydraulics
The two-pump load-sensing hydraulic system allows several consumers to be used at the same time, such as a hydraulic drifter and a flushing pump. The KLEMM hydraulic control ensures very sensitive control of all consumers.
State-of-the-Art drive train
The drilling rig KR 720 has a water-cooled diesel engine with 123 kW performance in continuous operation, and it complies with EU exhaust level V or USA EPA Tier 5. Convenient diagnostics options are included on-board as standard for engine management and machine control.
Advantages
Can be adjusted to the task at hand
- Wireless radio remote control to operate the machine from outside of the cabin
- Hydraulically controlled splash guard, mounted below the clamping and breaking device
- High-pressure washer DYNASET
- MBS 5 drill data recording system
- HPI connection up to 600 bar with integrated sensor for measuring pressures and volume of the grout using the MBS 5 system
- Lifting winch 10 kN
KLEMM benefits
Technical data
Type 310/10 (HPI) | Type 313/10 (HPI) | ||
Frame length | 15,000 mm | 15,000 mm | |
Lattice mast extension (option) | 6,000 + 4,000 + 3,000 mm | 6,000 + 4,000 + 3,000 mm | |
Single pass depth (option) | 25,000 mm | 25,000 mm | |
Feed force | 100 / 50 kN | 130 / 65 kN | |
Retraction force | 100 / 50 kN | 130 / 65 kN | |
Feed rate | 5 /11 m/min | 5 / 9 m/min | |
Retraction rate | 5 /11 m/min | 5 / 9 m/min | |
Fast feed rate | 33 / 65 m/min | 27 / 55 m/min | |
Fast retraction rate | 33 / 65 m/min | 27 / 55 m/min |
Do you need support?
Martin Bonzel
Regional Sales
Region: North America | Canada
